Armour Wheel Coating: High Temperature Resistant Quartz Coating
Regular price
$77.99
Armour Wheel Quartz Coating is a high-performance solution designed to protect and enhance the appearance of your wheels. With a solids content of 76% (SiO2) and a formula that's specifically engineered to resist heat and heavy abuse, this coating provides superior protection against brake dust and buildup. The coating's advanced composition creates a long-lasting barrier that repels contaminants, making maintenance and cleaning of your wheels easier and more convenient.
The versatility of Armour Wheel Quartz Coating is another major benefit, as it can be safely applied to an array of wheel finishes, including anodized, chrome, painted, powdercoated, clear-coated aluminum, and matte finishes. This allows for maximum compatibility with various types of wheels, ensuring that you can enjoy the protection and benefits of the coating no matter what type of wheels you have.
Armour Wheel Quartz Coating provides a durable layer of protection that can last for over 15,000 miles or 1+ year, depending on driving conditions. Choose Armour Wheel Quartz Coating for a reliable and low-maintenance solution for maintaining the appearance and protection of your wheels.
What's Included:
- 30ml Armour Wheel Quartz Coating w/ Dropper Top
- (1) Mini Microfiber Coating Application Pad
- "How To" Direction Card
Coating Guide
Precautions
- Shake well before use.
- Avoid applying in direct sunlight.
- Wear skin protection (nitrile gloves recommended).
- Wear respiratory protection in enclosed areas.
- Wear eye protection during application.
- Always test in a small, discreet area to determine optimal flash time.
- Cold conditions (below 60°F/15°C) extend wipe-off time to 2–3 minutes; hot conditions (above 80°F/27°C) shorten it to 1–2 minutes.
- Shelf life of 12 months sealed; use within 30 days of opening.
Prep
Preparation is critical; even the best coating cannot compensate for inadequate prep!
- Decontaminate wheel surfaces with Armour Detail Supply Wheel Cleaner, then remove embedded fallout with a clay bar or synthetic clay mitt.
- If wheels are painted or powder-coated and show light scratches or swirl marks, lightly polish to restore surface uniformity and gloss.
- Wipe down with Armour Detail Supply Panel Prep to remove polishing oils and residue. If no polishing was needed, repeat the Panel Prep step twice to ensure a perfectly clean surface.
Application
- Prime the Applicator: Dispense three lines of coating onto the mini applicator pad for the first wheel; subsequent wheels require only one line each.
- Coat One Wheel at a Time: Using back-and-forth or crosshatch motions, spread the coating evenly across the entire wheel face, barrel, and lip. Allow 1–3 minutes “set-up” (typically 1–2 minutes) until a light haze appears.
- Level the Coating:
- First wipe: Use a short-nap, pearl-weave microfiber to remove ~95% of the coating with small circular motions. The towel should grab slightly but release easily. If removal is too difficult, reduce the set-up time; if it smears, allow more time.
- Second wipe: Switch to a plush microfiber and wipe in straight lines for a final, streak-free finish. Inspect each wheel for high spots or cloudy areas and rewipe if necessary.
- Towel Management: Use a fresh face of your microfiber for each wheel to prevent cross-contamination.
- Layering (Optional): For maximum durability, apply a second layer after 1–2 hours, following the same application and leveling steps.
After Care
- Initial Cure: Let wheels sit for at least 12 hours before exposure to water.
- Cure Protection: After 4 hours, boost protection by applying Armour Detail Supply AMPLIFY or Ceramic Spray Sealant.
- Wet Conditions: Wheels can get wet after 12 hours but avoid harsh chemicals or pressure washing for 7 days to allow full cross-linking.
Frequently Asked Questions
How many wheel sets can you coat with the 30ml bottle?
A 30ml bottle typically covers one standard set of four wheels. Careful application and minimal product usage can extend coverage to small wheels or allow for one partial extra wheel.
Can multiple layers be applied?
Yes. While the single layer provides 12–15,000 miles or 1+ year of protection, a second layer applied after 1–2 hours further enhances chemical resistance and gloss retention.
Can Armour Wheel Coating be applied to brake calipers?
Yes. Ensure calipers are fully cooled, clean, and free of brake dust. Use the same prep and application steps, taking extra care to avoid coating brake pads and rotors.
What is the cure time for the coating?
- Initial Handling: 4 hours until light handling and booster spray.
- Safe Wet Exposure: 12 hours before getting wet.
- Full Cure: 7 days for maximum hardness, heat resistance, and chemical resilience.
Shipping will be calculated at checkout.
Shipping will be calculated at checkout.
Armour Wheel Coating: High Temperature Resistant Quartz Coating
Regular price
$77.99
Armour Wheel Quartz Coating is a high-performance solution designed to protect and enhance the appearance of your wheels. With a solids content of 76% (SiO2) and a formula that's specifically engineered to resist heat and heavy abuse, this coating provides superior protection against brake dust and buildup. The coating's advanced composition creates a long-lasting barrier that repels contaminants, making maintenance and cleaning of your wheels easier and more convenient.
The versatility of Armour Wheel Quartz Coating is another major benefit, as it can be safely applied to an array of wheel finishes, including anodized, chrome, painted, powdercoated, clear-coated aluminum, and matte finishes. This allows for maximum compatibility with various types of wheels, ensuring that you can enjoy the protection and benefits of the coating no matter what type of wheels you have.
Armour Wheel Quartz Coating provides a durable layer of protection that can last for over 15,000 miles or 1+ year, depending on driving conditions. Choose Armour Wheel Quartz Coating for a reliable and low-maintenance solution for maintaining the appearance and protection of your wheels.
What's Included:
- 30ml Armour Wheel Quartz Coating w/ Dropper Top
- (1) Mini Microfiber Coating Application Pad
- "How To" Direction Card
Coating Guide
Precautions
- Shake well before use.
- Avoid applying in direct sunlight.
- Wear skin protection (nitrile gloves recommended).
- Wear respiratory protection in enclosed areas.
- Wear eye protection during application.
- Always test in a small, discreet area to determine optimal flash time.
- Cold conditions (below 60°F/15°C) extend wipe-off time to 2–3 minutes; hot conditions (above 80°F/27°C) shorten it to 1–2 minutes.
- Shelf life of 12 months sealed; use within 30 days of opening.
Prep
Preparation is critical; even the best coating cannot compensate for inadequate prep!
- Decontaminate wheel surfaces with Armour Detail Supply Wheel Cleaner, then remove embedded fallout with a clay bar or synthetic clay mitt.
- If wheels are painted or powder-coated and show light scratches or swirl marks, lightly polish to restore surface uniformity and gloss.
- Wipe down with Armour Detail Supply Panel Prep to remove polishing oils and residue. If no polishing was needed, repeat the Panel Prep step twice to ensure a perfectly clean surface.
Application
- Prime the Applicator: Dispense three lines of coating onto the mini applicator pad for the first wheel; subsequent wheels require only one line each.
- Coat One Wheel at a Time: Using back-and-forth or crosshatch motions, spread the coating evenly across the entire wheel face, barrel, and lip. Allow 1–3 minutes “set-up” (typically 1–2 minutes) until a light haze appears.
- Level the Coating:
- First wipe: Use a short-nap, pearl-weave microfiber to remove ~95% of the coating with small circular motions. The towel should grab slightly but release easily. If removal is too difficult, reduce the set-up time; if it smears, allow more time.
- Second wipe: Switch to a plush microfiber and wipe in straight lines for a final, streak-free finish. Inspect each wheel for high spots or cloudy areas and rewipe if necessary.
- Towel Management: Use a fresh face of your microfiber for each wheel to prevent cross-contamination.
- Layering (Optional): For maximum durability, apply a second layer after 1–2 hours, following the same application and leveling steps.
After Care
- Initial Cure: Let wheels sit for at least 12 hours before exposure to water.
- Cure Protection: After 4 hours, boost protection by applying Armour Detail Supply AMPLIFY or Ceramic Spray Sealant.
- Wet Conditions: Wheels can get wet after 12 hours but avoid harsh chemicals or pressure washing for 7 days to allow full cross-linking.
Frequently Asked Questions
How many wheel sets can you coat with the 30ml bottle?
A 30ml bottle typically covers one standard set of four wheels. Careful application and minimal product usage can extend coverage to small wheels or allow for one partial extra wheel.
Can multiple layers be applied?
Yes. While the single layer provides 12–15,000 miles or 1+ year of protection, a second layer applied after 1–2 hours further enhances chemical resistance and gloss retention.
Can Armour Wheel Coating be applied to brake calipers?
Yes. Ensure calipers are fully cooled, clean, and free of brake dust. Use the same prep and application steps, taking extra care to avoid coating brake pads and rotors.
What is the cure time for the coating?
- Initial Handling: 4 hours until light handling and booster spray.
- Safe Wet Exposure: 12 hours before getting wet.
- Full Cure: 7 days for maximum hardness, heat resistance, and chemical resilience.
Shipping will be calculated at checkout.
Shipping will be calculated at checkout.
THOR Exclusive Brands
Clean by Pan the Organizer is a premium, custom brand crafted personally by Pan himself. From shampoo to ceramic coatings, each product has undergone multiple revisions to ensure they meet Pan's high standards of excellence.
Clean by Pan the Organizer is a premium, custom brand crafted personally by Pan himself. From shampoo to ceramic coatings, each product has undergone multiple revisions to ensure they meet Pan's high standards of excellence.
Conceived by Eddie and Jamie, our goal was to create a brand where quality meets affordability. We wanted to empower you to take control of your business and finances, leading to the creation of Detail Co. We uphold high standards without the high prices, serving the community with exceptional value.
Conceived by Eddie and Jamie, our goal was to create a brand where quality meets affordability. We wanted to empower you to take control of your business and finances, leading to the creation of Detail Co. We uphold high standards without the high prices, serving the community with exceptional value.