
INNOVACAR S2 FOAMY GREEN FRESH 1000ml
Innovacar's S2 Foamy Color Verde is the car shampoo with green foam and active foam to clean and wash your car efficiently and effectively. The colour result is an added value that does not detract from the cleaning capabilities of the original version.
Combining a cheerful and colorful effect with car washing is something you must try. Plus it is PH neutral, therefore it does not harm the protective aspects of any previously applied films.
HOW TO USE S2 FOAMY COLOR GREEN
We recommend using green active foam car shampoo with a foam gun. The brightness of the color depends on how diluted the product is. For correct use:
- Dilute the product according to the indications and selected mode of use.
- Stir the foam wand to mix the detergent and water to obtain a homogenous solution.
- Deliver the foam over the entire car, starting on the bottom and applying it horizontally to then gradually move upwards. This will prevent any dripping during rinsing.
- Proceed with rinsing with plenty of high pressure water, starting from the top of the car and gradually working downwards.
Be particularly careful to rinse generously until all of the color is completely removed from the car and hidden nooks.
If applied with a foam lance or foam gun: the recommended dilution ranges from 1:9 to 1:12, use from 100 ml to 75 ml of product and add the remaining part of water (from 900 ml to 925 ml) to obtain 1 L of ready-for-use solution. During supply, the actual final dilution can reach approximately 1:150 to 1:195.
For frequent washing the recommended dilution ranges from 1:25 to 1:50, use from 40 ml to 20 ml of product and add the remaining part of water (from 960 ml to 980 ml) to obtain 1 L of ready-for-use solution. While dispensing, the actual final dilution can reach approximately 1:390 to 1:765.
If used for pre-washing for weekly dirt: the recommended dilution ranges from pure to 1:20, i.e. use up to 50 ml of product and fill the remaining part with water (950 ml) to obtain 1 L of ready-for-use solution. While dispensing, the actual final dilution can reach approximately 1:315.
Precautions: do not apply in the sun and on hot surfaces, fabrics or porous surfaces. Do not let the product dry. When diluting the pure product it is advisable to use suitable gloves and be careful to protect your hands and clothes from the pure color as it is highly concentrated.
Shipping will be calculated at checkout.
Shipping will be calculated at checkout.
INNOVACAR S2 FOAMY GREEN FRESH 1000ml
Innovacar's S2 Foamy Color Verde is the car shampoo with green foam and active foam to clean and wash your car efficiently and effectively. The colour result is an added value that does not detract from the cleaning capabilities of the original version.
Combining a cheerful and colorful effect with car washing is something you must try. Plus it is PH neutral, therefore it does not harm the protective aspects of any previously applied films.
HOW TO USE S2 FOAMY COLOR GREEN
We recommend using green active foam car shampoo with a foam gun. The brightness of the color depends on how diluted the product is. For correct use:
- Dilute the product according to the indications and selected mode of use.
- Stir the foam wand to mix the detergent and water to obtain a homogenous solution.
- Deliver the foam over the entire car, starting on the bottom and applying it horizontally to then gradually move upwards. This will prevent any dripping during rinsing.
- Proceed with rinsing with plenty of high pressure water, starting from the top of the car and gradually working downwards.
Be particularly careful to rinse generously until all of the color is completely removed from the car and hidden nooks.
If applied with a foam lance or foam gun: the recommended dilution ranges from 1:9 to 1:12, use from 100 ml to 75 ml of product and add the remaining part of water (from 900 ml to 925 ml) to obtain 1 L of ready-for-use solution. During supply, the actual final dilution can reach approximately 1:150 to 1:195.
For frequent washing the recommended dilution ranges from 1:25 to 1:50, use from 40 ml to 20 ml of product and add the remaining part of water (from 960 ml to 980 ml) to obtain 1 L of ready-for-use solution. While dispensing, the actual final dilution can reach approximately 1:390 to 1:765.
If used for pre-washing for weekly dirt: the recommended dilution ranges from pure to 1:20, i.e. use up to 50 ml of product and fill the remaining part with water (950 ml) to obtain 1 L of ready-for-use solution. While dispensing, the actual final dilution can reach approximately 1:315.
Precautions: do not apply in the sun and on hot surfaces, fabrics or porous surfaces. Do not let the product dry. When diluting the pure product it is advisable to use suitable gloves and be careful to protect your hands and clothes from the pure color as it is highly concentrated.
Shipping will be calculated at checkout.
Shipping will be calculated at checkout.
THOR Exclusive Brands
Clean by Pan the Organizer is a premium, custom brand crafted personally by Pan himself. From shampoo to ceramic coatings, each product has undergone multiple revisions to ensure they meet Pan's high standards of excellence.
Clean by Pan the Organizer is a premium, custom brand crafted personally by Pan himself. From shampoo to ceramic coatings, each product has undergone multiple revisions to ensure they meet Pan's high standards of excellence.
Conceived by Eddie and Jamie, our goal was to create a brand where quality meets affordability. We wanted to empower you to take control of your business and finances, leading to the creation of Detail Co. We uphold high standards without the high prices, serving the community with exceptional value.
Conceived by Eddie and Jamie, our goal was to create a brand where quality meets affordability. We wanted to empower you to take control of your business and finances, leading to the creation of Detail Co. We uphold high standards without the high prices, serving the community with exceptional value.
