MANIAC FOAM GUN PREWASH

Why, even if you wash the car by hand, personally and carefully wash after wash, you see micro-scratches and lines appear on the bodywork?
And when you empty the bucket, have you ever found dirt residues, such as soil at the bottom?

If the answer is YES, it means that no one has ever taught you the correct washing procedure: Let’s see it together:
Following the correct washing procedure, we start with cleaning rims and tires and their decontamination.

The next phase is the Pre-wash
it is carried out BEFORE proceeding with manual washing with shampoo.

PREWASH is the fundamental step that makes all the difference: we will in fact remove up to 80% of the coarse dirt present on the bodywork, without mechanical action, therefore without touching it.

Dirt particles firmly anchored to the bodywork, if you do not carry out a correct pre-wash, during manual washing will be transported by the glove or by the washing sponge with the risk of creating micro scratches (called “swirls” in the jargon) or worse deep scratches (called in jargon “rids”).

Only after having carried out a correct prewash can you proceed with manual washing in total safety. To learn more about the correct washing procedures, we invite you to watch the dedicated video.

• Cleans, polishes and protects all external surfaces
• Powerful and safe foaming prewash with dry and compact foam
• Eliminates smog, road dirt, midges, organic residues of plants or birds
• Excellent economy thanks to high dilution ratios
• It can be used frequently because it respects previously applied protective agents including nanotechnology-based or coating.
• Multifunctional product: created to be used with pump sprayer or foam gun.
• Using it with a high-pressure water cleaner makes the subsequent washing phase safer, eliminating 90% of dirt and allowing you to wash your car without the risk of creating swirls or micro-scratches.
• Pleasantly scented
• The product can be applied directly to the bodywork without wetting it first, even in the presence of very stubborn dirt such as midges and on the lower parts of the car that are always the dirtiest. Remove mud first with a jet of water before applying the product. Ensure the car is in the shade, avoiding direct sunlight, and that the surface is not hot. Otherwise, cool the car first with a jet of water.

• It is recommended to use the product with a foam gun, but it is also excellent for pre-washing using a manual sprayer.

  Using a high-pressure foam gun, in winter dilute the product with a ratio of 1:5 (1 part product in 5 parts water), for a final-output dilution ratio of around 1:50,

  Using a high-pressure foam gun, in summer dilute with a ratio of 1:10 (1 part product in 10 parts water) a final-output dilution ratio of around 1:100.

  Spray a thick layer of foam on the vehicle and wait for it to run off (this may take up to 5 minutes).

  Rinse the vehicle from top to bottom.

  Using a low-pressure manual pump sprayer, in winter dilute with a ratio of 1:50 (1 part product in 50 parts water), 2 caps in 1 liter of water,

  Using a low-pressure manual pump sprayer, in summer with a ratio of 1:100 (1 part product to 100 parts water), 1 cap in 1 liter of water.

  Spray the product on the vehicle and wait 1 minute without letting the product dry on the bodywork, then rinse.